IEM Build & Design

The T2 Galaxy is blue in color. At the back of the shell, there are L & R markings on the left and right side respectively with the brand website. The left faceplate has a flower-like logo and the right faceplate has a Z logo. There are vent and screw at the edge of each faceplate. On the inside of the iem, there is a vent too. The nozzle is slightly angled with metal mesh. The T2 Galaxy utilizes 2 pins 0.78mm connectors and it has an ergonomic design with good construction.


photo_2018-12-01_21-48-49 (2)

photo_2018-12-01_21-48-48 (2)

photo_2018-12-01_21-48-48 (3)

Cable Build & Design

The cable is 4 core twisted and made of 5N OFC. On each of the 2 pins connectors, there are L & R markings on the outside of the left and right respectively. The connectors have translucent housing. There is a memory wire area section and the cable is enclosed in a transparent heat-shrink tube which is very flexible. The y-splitter is black in color and sports the brand logo. Lastly, the jack is 3.5mm gold plated straight with strain relief and has a silver housing. On the housing of the jack, there is the brand logo printed. Overall, the cable is flexible with little microphonics.

photo_2018-12-01_21-48-48 (4)

Page 3: Sound Analysis