IEM Build & Design

The IT01s is made of plastic and it comes in 2 colours – blue mist and smoke grey. This unit is blue mist in colour. The IT01s has a smooth and shiny surface. Each faceplate sports the model name and brand logo. On the top of each shell near the nozzle, there are L & R markings on the left and right side respectively. On the inside of each shell, there are 2 vents. In addition, the nozzle is slightly angled. The IT01s utilizes a cable with MMCX connectors. The IT01s has an ergonomic design with a light weight.

photo_2019-02-11_20-38-57 (3)

photo_2019-02-11_20-38-57 (4)

photo_2019-02-11_20-38-57 (2)

photo_2019-02-11_20-38-58 (3)

Cable Build & Design

The cable is made of 5N Mono Crystal Copper with a silver-plated shield. It has a 2 core twisted design. The MMCX connectors on the cable have a silver housing. There is indication of left and right through the L & R markings/Blue & Red rings on the surface of the housing respectively. There is a memory wire area section in which the cable is enclosed in a transparent heat shrink tube. Moving down to the chin slider and y-splitter, they are silver in colour and circular in shape.  Lastly, the jack is 2.5mm balanced straight and the housing is silver in colour. The brand name is printed on the housing. There is strain relief.

photo_2019-02-11_20-38-58

Adapter Build & Design

The cable adapter wire is also made of 5N Mono Crystal Copper with a silver-plated shield. There is strain relief at both ends. The jack is 3.5mm straight and there is the brand name printed on its housing.

photo_2019-02-11_20-38-58 (2)

Page 3: Sound Analysis